Everplast Gold


Everplast is a specially designed polymer based spray plaster compound, comprising of advanced and superior binder resin & fine graded filter extenders. It has the properties to resist fungus, anti-rusting, anti-sagging and easy sanding to provide and ideal ultra smooth white surface to receive final paint finish.

Everplast is used to provide smooth surface on cement plaster walls, pre-cast concrete, P.O.P., gypsum board, wooded boards, veneer, panel roofs, concrete surfaces, etc.


  1. Solvent free water based economical material
  2. Easy application & fast drying
  3. Good adhesion properties
  4. Easy sanding
  5. Less gloss absorption thereby giving a better finish and less consumption of the paint.
  6. Has water-proofing properties

The surface should be clean and free from dirt, dust, grease & oil.

Method of application:
Prepare a paste of Everplast powder putty by adding water as per requirement. Everplast is to be applied by hand with a knife edge broad spatula or spray application can be done with airless spraying unit. Application shall be approx. 500 microns for better result. In the areas of very rough surface use coarse grains of the powder.

Application rate of Everplast for 1kg is 8 sq. ft. to 16 sq. ft. depending upon the smoothness of the surface.

Shelf life of 1 year in an unopened container from the date of manufacturing, to be stored in cool & dry conditions, avoiding direct sunlight.

Everplast can be cleaned with water before drying, scraping or using any suitable petroleum solvent.

Available in 1kg, 5kg and 20 kg bags.

Health & Safety:
Avoid inhalation or contact with eyes, escort the person to fresh air, supply the affected area with water at first and call for medical attention immediately.

Office Address:
Unit No.1, Tare Compound,
Opp. Dahisar Octroi Naka,
Behind Krishna Restaurant,
Near Dahisar Check Post
Mumbai - 400 068.

Contact: Bharat Sachanandani
+91 98206 28597

Contact: Ashwin Sachanandani
+91 98206 28513