Loading
 

Ever Tek - Acrylic Based Readymade Paste Putty

 

Description:
Ever Tek is a ready-to-use, specially designed acrylic based paste putty which gives a Pearl White finish. It comprises of advanced & superior binder resin & fine graded filler extenders. It has the properties to resist fungus, anti-rusting, anti-sagging and easy sanding to provide and ideal ultra smooth surface to receive final paint finish.

Uses:
Ever Tek is used to provide smooth surface on cement plaster walls, precast concrete, P.O.P., gypsum board, wooded boards, veneer, panel roofs, concrete surfaces, etc.

Advantages:

  1. Solvent free water based economical material
  2. Easy application & fast drying
  3. Good adhesion properties
  4. Easy sanding
  5. Less gloss absorption thereby giving a better finish and less consumption of the paint.

Preparation:
The surface should be clean and free from dirt, dust, grease & oil.

Method of application:
Ever Tek paste putty does not need water to be added to it. It is to be applied by hand with a knife edge broad spatula or via spray application with an airless spraying unit. Application shall be approx 500 microns for better result. In areas of very rough surface, use Ever Tek in multiple coats and can be diluted using water, if needed.

Coverage:
Application rate of Ever Tek for 1kg is 8 sq. ft. to 16 sq. ft. depending upon the smoothness of the surface.

Storage:
Shelf life of Ever Tek paste putty is approximately one and a half to two months in an unopened container from the date of manufacturing. It is to be stored in a cool & dry condition, avoiding direct sunlight.

Cleaning:
Ever Tek can be cleaned with water before drying, scraping or using any suitable petroleum solvent.

Packing:
Available in 1kg, 5kg and 20 kg bags.

Health & Safety:
Avoid inhalation or contact with eyes, escort the person to fresh air, supply the affected area with water at first and call for medical attention immediately.



Office Address:
Unit No.1, Tare Compound,
Opp. Dahisar Octroi Naka,
Behind Krishna Restaurant,
Near Dahisar Check Post
Mumbai - 400 068.

Contact: Bharat Sachanandani
+91 98206 28597
bharatsach@everplast.in

Contact: Ashwin Sachanandani
+91 98206 28513
ashwinsach@everplast.in