Loading
 

Ever Proof

 

Description:
Ever Proof is a polymer-based, ready to use & easy to apply single component liquid, applied as an elastomeric water proofing membrane.

Uses:
Ideal waterproofing and protective system for concrete roofs, polystyrene built up roofs, masonry & concrete walls, toilet blocks, terraces, roof gardens, chhajjas, sloping roofs galleries, dome, arches, shell roofs, expansion joints, damp proof surfaces, protective coat for stilled R.C.C., columns, doors, window frames, weather shades, automobile flooring and coach tops for anti-drumming protective coating for polyurethane foam insulation etc.

Advantages:

  1. Solvent free, water based economical material
  2. Self priming & fast drying
  3. Resists U.V. rays & mild acids
  4. Sustains thermal expansion
  5. It has elongation of approximately 300% thereby usable in expansion joints
  6. Resists temperature from 5°C to 165°C
  7. Can be used externally on vertical or horizontal surfaces as well as in sandwich course
  8. Improves solar reflection & imparts insulation quality
  9. Good adhesion to concrete A.C. sheet tiles, cement plasters, marble, glass, bricks, metals, wood and polyurethane foam
  10. Resists fungus & micro-organism growth
  11. With stands voltage up to 5kVA

Preparation:
The surface should be clean & free from dirt, dust, grease & oil.

Method of application:
It can be applied with a simple brush or roller or squeezee. Three coats of Ever Proof are to be applied with water.
   1. Add 50% water and 50% Ever Proof, which is to be applied as primary coat. (Allow it to dry.)
   2. Apply the 2nd with 70% water and 30% Ever Proof.
   3. After the previous coat is dry, the last coat is applied with 80% water and 20% Ever Proof.

Coverage:
Application at the rate of 1kg for 1sq. mt. approximately

Storage:
Shelf life of one year from the date of manufacture. Store in closed containers under moderate temperature.

Cleaning:
Can be cleaned with water before drying.

Packing:
Available in pack of 1Kg, 5Kg, and 20Kg

Health & Safety:
Avoid inhalation or contact with eyes, escort the person to fresh air, supply the affected area with water at first and call for medical attention immediately. Technical services are available for assistance on any specific use & application.

Technical Data:  
Color Off white
Physical property  Thyrotropic non flowing on vertical surface
Condition after drying Flexible & elastic
Touch dry Approx 1 hour
Thorough dry 40 hours
Solid contents Min 50%
Flash Point Non-inflammable
Heat Resistance No cracking, no blister
Resistance to water Excellent
Solar reflection Excellent
Insulation Good
Chemical resistance Good


Office Address:
Unit No.1, Tare Compound,
Opp. Dahisar Octroi Naka,
Behind Krishna Restaurant,
Near Dahisar Check Post
Mumbai - 400 068.

Contact: Bharat Sachanandani
+91 98206 28597
bharatsach@everplast.in

Contact: Ashwin Sachanandani
+91 98206 28513
ashwinsach@everplast.in